You’re sitting at your computer, and you’ve just turned it on. Nothing occurs. It could be that the computer will not switch on, that it will stop working unexpectedly, or that it will just display a blue screen.
The computer is in perfect working order, however it will not start. Do not become concerned if you are unable to start your computer. There are a few things you can do to correct it. You can either select and reboot the appropriate boot device or insert boot media into the appropriate boot device and press the key.
It could be a power issue if your computer does not turn on at all. There are no lights blinking, no fans going, and nothing on the screen. However, there is still time to act. Here are a few things to keep in mind.
You Have To Give More Power To Your Computer
To begin, unplug your computer and re-plug it into a wall socket, making sure it is still working rather than a battery backup that may be malfunctioning. You must also ensure that your power supply’s power switch is turned on. Make certain that the light switch is also switched on.
If you’re using a laptop, double-check that the charger is correctly connected. But keep in mind that only the USB-C connectors are capable of supplying power. A malfunctioning power supply might cause problems even if the fans and lights are still turned on. If the steps above don’t work, it’s necessary to change your power supply.
Regularly Check Your Monitor
Though the computer sounds as if it is going to start up but does not display an image, there is a problem. Make sure the monitor is turned on and hooked in. Use the buttons on the bottom or side of the monitor to set the input to the right.
You should also check that the wire connecting your monitor to your computer is secure. It might be the cable that has to be replaced if it becomes broken or if you attach another device to it by accident.
Make sure your laptop’s brightness is switched on if you’re using one. It may appear stupid, but it is necessary to avoid a dark screen. When several people ask for help with their laptops, the brightness is turned off, resulting in a black screen.
If none of these work, try connecting your computer to a different monitor and seeing if Windows appears. If it does, you’ll need to replace it.
Listen If There Is a Strange Sound
A single beep could mean everything is fine. In other situations, though, it may make a succession of unusual noises to indicate what is wrong. These sounds could be Morse code. If you’re not sure what the beeps represent, go to the manufacturer’s website and look for the manual for your computer or motherboard.
If you can’t hear your computer beep, it’s possible that it’s broken and you’re not sure how to fix it. A header on some desktop computers contains a code that can be used to correct an error.
You Need To Remove Unnecessary Device From Your Computer
Remove any unnecessary devices from your computer.
Make sure all of your superfluous equipment are out of the way before you start a new computer. External hard drives, cameras, and USB headsets are just a few examples. Try booting with a keyboard and mouse to see if one of these is causing a conflict.
It is not always the equipment that causes the computer to malfunction. It could be the computer’s port. Some users have reported that after putting in an external device, their computer would not boot properly. The ports had to be empty during the boot phase in order for the device to function properly.
Hardware Inside Problem
It’s possible that a component on your computer has come loose if something goes wrong. If it was transported somewhere or if you are working on it, this could happen. If you don’t want the computer to be opened, take off the side panel. You must ensure that the parts are correctly seated in their sockets.
Remove all of your computer’s physical components, including the processor heatsink, RAM, and graphics card. They should then be reconnected. You could also try removing various components from your computer, such as the graphics card or RAM stick. If that doesn’t work, try the other option.
